Beko

    • BEKO Touch
    • BEKO Touch 2
       Login
      beko900 beko900st beko900xf beko900xp

    • BEKOMAT 12
       Alarm Test
      To test pre-alarm function press the Test button for more than 1 minute but less than 5 minutes. To test alarm function press the Test button for more than 5 minutes.

    • BEKOMAT 13
       Alarm Test
      To test pre-alarm function press the Test button for more than 1 minute but less than 5 minutes. To test alarm function press the Test button for more than 5 minutes.

    • BEKOMAT 20FM
       Filter Lifetime Reset
      Press and hold Test and Mode buttons for at least 10 seconds, all lifetime LEDs will begin to flash. To confirm reset press the Mode button. To cancel reset press the test button or don’t press any buttons for 60 seconds.

    • BEKOMAT 31-33
       Maintenance Reset
      Remove control unit from top of drain. Press and hold test button for at least 5 seconds. Reinstall control unit on top of drain.

      Test Alarm Function
      Press and hold the Test button for at least one minute.

    • BEKOMAT 8-9
       Alarm Test
      Press and hold the Test button for 1 minute.

    • DMC18
       HdP Alarm
      High dew point.

      LdP Alarm
      Low dew point.

      PF Alarm
      Failure of temp probe T1 (dew point). Check cabling or replace probe if bad.

      SrV Alarm
      Service alarm. Service unit and reset timer by holding the wrench/down arrow button for at least 20 seconds.

      drA Alarm
      Bekomat condensate drain has faulted. Inspect and replace if required.

    • DMC51
       User Manual

    • Metpoint BDL Compact
       Default
      4321